Direct spray closer to the target with a transparent nozzle shield. This agricultural spray shield surrounds one or two nozzle outlets while keeping the work area visible. Choose a single- or dual-nozzle setup in medium or large.
Important: The shield can reduce direct wind exposure around the nozzle, but it does not make spraying windproof and cannot eliminate drift. Do not spray in windy conditions or use any liquid contrary to its label, your equipment instructions, or local requirements.
Choose Your Spray Shield Setup
-
Single Nozzle – Medium: 9.84 in (25 cm) wide × 3.94 in (10 cm) high; approximately 3.35 in (8.5 cm) deep
-
Single Nozzle – Large: 14.96 in (38 cm) wide × 5.91 in (15 cm) high; approximately 4.72 in (12 cm) deep
-
Dual Nozzle – Medium: 11.02 in (28 cm) wide × 3.46 in (8.8 cm) high; approximately 5.31 in (13.5 cm) deep
-
Dual Nozzle – Large: Large two-nozzle shield shown in the product gallery; supplier dimensions are not listed
Measurements are approximate and are based on the product images. Compare the shield size and nozzle configuration before choosing.
What Is Included
You will receive one transparent spray shield and nozzle setup in the selected configuration. A spray wand, hose, pump, tank, and other equipment shown for demonstration are not included.
Compatibility
This is not a universal attachment. The connector and thread dimensions are not listed in the current product images. Compare your sprayer wand, operating pressure, hose connection, and replacement-nozzle requirements before ordering. Do not force an incompatible fitting.
Useful Features
- Transparent shield keeps the target area visible while spraying
- Single- and dual-nozzle choices for different coverage needs
- Medium and large guards for rows, beds, and open garden areas
- Shielded design helps keep the nozzle closer to the intended surface
Setup and Safe Use
- Turn off and depressurize the sprayer before installing or changing the attachment.
- Confirm every fitting is compatible and secure, then test with clean water.
- Check for leaks and verify the spray pattern in a clear test area.
- Use only liquids approved for your sprayer and application. Follow all product-label instructions and required protective equipment.
- Keep people, pets, waterways, and non-target plants away from the spray area.
- Flush the nozzle and shield with clean water after use, following the liquid manufacturer's disposal instructions.
Frequently Asked Questions
Is this nozzle completely windproof?
No. The guard can shelter the immediate nozzle area, but wind can still carry droplets beyond the target. Stop spraying when conditions are unsuitable.
What do Single, Dual, M, and L mean?
Single and Dual describe the number of nozzle outlets. M means medium and L means large. Use the dimensions above and the gallery images to select a configuration.
Will it fit every spray wand?
No. Connector standards vary and the fitting size is not shown in the current images. Confirm compatibility with your sprayer before purchase.
Are the wand and spray tank included?
No. This listing includes the selected spray shield and nozzle setup only. The wand, hose, pump, and tank are not included.
Shop more garden care tools or visit our frequently asked questions.
